But this phone may have some system problems that includes:
1. The application run automatically
3. Or it display message like "unfortunately system has stopped" or "unfortunately google play service has stopped".
4. When you power on your phone display only logo and nothing else is happen.
5. when powering on your phone only white screen appear and nothing else.
If you have a problem like this then you have to flash your phone in order to over come these problems so i'll give you the link for Tecno P5 flash file to flash your phone.
Of cause you have an ides of flashing that's why you are here on this post but i suggest you to read this full content that may help you to escape unexpected error during flashing your phone.
Also read a full TECNO P5 SPECS to compare with your phone. also this will prevent flashing the wrong rom.
NOTE: Flashing the wrong stockrom may cause a serious problems and some time may damage your phone and can't be flashed again.
As I said that you have an idea of flashing so you are flashing your rom on your own. I'm not responsible for any damage.
Short tutorial on how to flash your tecno F7_A1+, Please read this tutorials to prevent any error while flashing your phone.
1. Download MTK USB-VCOM driver and install it in your computer. If you don't know how to install this driver then read read full tutorial on how to install MTK USB-VCOM drivers.
2. Download SP-Flash tool and extract it to your computer.
3. Download TECNO F7 A1+ firmware/flashfile and extract it to your computer.
4. Open Sp flash tool folder that you extracted and run "flash_tool.exe" or "flash tool" .(Recommended to run it as administrator"Run as administrator").
5. Click choose "Scatter loading file" and navigate where you extracted your flash file and then select the scatter file usually it looks like "MT6572_Android_scatter".
6. In sp flash tool do not select preloader if you don't what you are doing and then click download.
7. Power off your phone and an then remove the battery.
8. Connect your phone to your computer using USB cable wit out battery.
9. Once your computer has detected your phone then immediately inset your battery. If your phone did't detected your phone then the driver is installed correctly or your USB cable does not work properly so try to fix these issues and try again.
10. Wait until the flashing process is done.
11. Disconnect your phone from computer and power it on.
You are all done.
NOTE:Once you power on your phone it will take long time at the first time then normal.
TECNO F7 SPECS
GENERAL
OS: Android 4.0 Ice Cream Sandwich
Processors: 1.2 GHz dual-core Mediatek MT6577H CPU
RAM: 1 GB
Card slot: MicroSD, up to 32 GB
Internal: 4 GB
Dimensions: 143.5×70.8×9.1mm
Keyboard: Touchscreen
Colors: White, Black, Yellow
Cover: Plastic
SIM Dual mini SIM
CAMERA
Primary: 8 MP, up to 3264×2448 pixel pictures.
Secondary: 1.3MP
DISPLAY
Type: TFT capacitive touchscreen with 16,000,000 colors
Size: 720 x 1280 pixels, 5 inches, 293 pixels per inch (PPI)
NETWORK
2G Network GSM 850 / 900 / 1800 / 1900
3G Network HSDPA 2100
4G Network No
CONNECTIVITY
2G: GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G: Up to 7.2 mbps uplink; Up to 5.76 mbps downlink
4G: No
WIFI: Wi-Fi 802.11 b/g/n, WIFI hotspot, WIFI direct, dual-band
Bluetooth: Version 3.0
GPS: A-GPS
USB: MicroUSB v2.0
BATTERY
Capacity: 2100mAH Battery
Talktime (3G): Up to 12 Hours
Standby Time: Up to 400 Hours
Click the button below to download Tecno F7 Phantom A+ 4.2 MT6589 Variant 1 (MTK Backup)
Post a Comment