But this phone has got some system problems that includes:
1. The application run automatically
2. When you are connected to the internet the phone download files automatically that are not your desire
3. Or it display message like "unfortunately system has stopped" or "unfortunately google play service has stopped".
4. When you power on your phone display only logo and nothing else is happen.
5. when powering on your phone only white screen appear and nothing else.
Then you have to flash your phone in order to over come these problems so i'll give you the link for Tecno P5 flash file to flash your phone.
Of cause you have an ides of flashing that's why you are here on this post but i suggest you to read this full content that may help you to escape unexpected error during flashing your phone.
Also read a full TECNO P5 SPECS to compare with your phone. also this will prevent flashing the wrong rom.
NOTE: Flashing the wrong stockrom may cause a serious problems and some time may damage your phone and can't be flashed again.
As I said that you have an idea of flashing so you are flashing your phone on your own. I'm not responsible for any damage.
Short tutorial on how to flash your tecno P5, Please read this tutorials to prevent any error while flashing your phone.
1. Download MTK USB-VCOM driver and install it in your computer. If you don't know how to install this driver then read read full tutorial on how to install MTK USB-VCOM drivers.
2. Download SP-Flash tool and extract it to your computer.
3. Download TECNO P5 firmware/flashfile and extract it to your computer.
4. Open Sp flash tool folder that you extracted and run "flash_tool.exe" or "flash tool" .(Recommended to run it as administrator"Run as administrator").
5. Click choose "Scatter loading file" and navigate where you extracted your flash file and then select the scatter file usually it looks like "MT6572_Android_scatter".
6. In sp flash tool do not select preloader if you don't what you are doing and then click download.
7. Power off your phone and an then remove the battery.
8. Connect your phone to your computer using USB cable wit out battery.
9. Once your computer has detected your phone then immediately inset your battery. If your phone did't detected your phone then the driver is installed correctly or your USB cable does not work properly so try to fix these issues and try again.
10. Wait until the flashing process is done.
11. Disconnect your phone from computer and power it on.
You are all done.
NOTE:Once you power on your phone it will take long time at the first time then normal.
TECNO P5 SPECS
GENERAL
Platform Android 4.2.2 Jelly Bean
Processors 1.0 GHz dual-core Mediatek MT6572E CPU
RAM 512 MB
Dimensions 124.3 x 65.5 x 10.5mm
Keyboard Touchscreen
Colors White, Black, Yellow, Gray, Pink
Displa Size 480 x 800 pixels, 4.0 inches, 233 pixels per inch (PPI)
SIM Dual mini SIM
Card slot MicroSD, up to 32 GB
Internal Storage 4GB
CONNECTIVITY
2G GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G Up to 22.2 mbps uplink; Up to 5.76 mbps downlink
4G No
WIFI Wi-Fi 802.11 b/g/n, WIFI hotspot, Wi-Fi direct
Bluetooth Version 3.0
GPS A-GPS
NFC No
USB MicroUSB v2.0
CAMERA
Primary 5MP, up to 2560×1920-pixel pictures, HDR, face and smile detection camera with LED flash
Video VGA
Secondary 2MP up to 1600×1200-pixel pictures
BATTERY
Capacity 1800 mAh Li-Ion battery
Stand-by Up to 288 hours
Talk time Up to 8 hours, 30 minutes
TO DOWNLOAD TECNO P5 Old OS click the button below
TO DOWNLOAD Tecno P5 New OS Variant 1 Click the button below
TO DOWNLOAD Tecno P5 New OS Variant 2 Click the button below
TO DOWNLOAD Tecno P5 New OS Variant 3 Click The button below
Post a Comment