But this phone may have some system problems that includes:
1. The application run automatically
2. When you are connected to the internet the phone download files automatically that are not your desire
3. Or it display message like "unfortunately system has stopped" or "unfortunately google play service has stopped".
4. When you power on your phone display only logo and nothing else is happen.
5. when powering on your phone only white screen appear and nothing else.
If you have a problem like this then you have to flash your phone in order to over come these problems so i'll give you the link for Tecno F8 PHANTOM A2 flash file to flash your phone.
Of cause you have an ides of flashing that's why you are here on this post but i suggest you to read this full content that may help you to escape unexpected error during flashing your phone.
Also read a full F8 PHANTOM A2 SPECS to compare with your phone. Also this will prevent flashing the wrong rom.
NOTE: Flashing the wrong stockrom may cause a serious problems and some time may damage your phone and can't be flashed again.
As I said that you have an idea of flashing so you are flashing your rom on your own. I'm not responsible for any damage.
Short tutorial on how to flash your tecno F8 Phantom A2, Please read this tutorials to prevent any error while flashing your phone.
1. Download MTK USB-VCOM driver and install it in your computer. If you don't know how to install this driver then read read full tutorial on how to install MTK USB-VCOM drivers.
2. Download SP-Flash tool and extract it to your computer.
3. Download TECNO F8 Phantom A2 firmware/flashfile and extract it to your computer.
4. Open Sp flash tool folder that you extracted and run "flash_tool.exe" or "flash tool" .(Recommended to run it as administrator"Run as administrator").
5. Click choose "Scatter loading file" and navigate where you extracted your flash file and then select the scatter file usually it looks like "MT6572_Android_scatter".
6. In sp flash tool do not select preloader if you don't what you are doing and then click download.
7. Power off your phone and an then remove the battery.
8. Connect your phone to your computer using USB cable wit out battery.
9. Once your computer has detected your phone then immediately inset your battery. If your phone did't detected your phone then the driver is installed correctly or your USB cable does not work properly so try to fix these issues and try again.
10. Wait until the flashing process is done.
11. Disconnect your phone from computer and power it on.
You are all done.
NOTE:Once you power on your phone it will take long time at the first time then normal.
TECNO F8 SPECS
GENERAL
OS: Android 4.2 Jelly Bean
Processors: 1.2 GHz quad-core Mediatek MT6589 CPU
RAM: 1 GB
Card slot: MicroSD, up to 32 GB
Storage: 4 GB
Dimensions: 160 x 82 x 8.9mm
Keyboard: Touchscreen
Colors: White, Black, Yellow
Cover: Plastic
SIM Dual mini SIM
CAMERA
Primary: 13MP, up to 4128×3096-pixel pictures.
Secondary: 8MP up to 3264×2448 pixel pictures
Video: 1080p
DISPLAY
Type: TFT capacitive touchscreen with 16,000,000 colors
Size: 720 x 1280 pixels, 5 inches, 293 pixels per inch (PPI)
NETWORK
2G Network GSM 900 / 1800
3G Network HSDPA 2100
4G Network No
CONNECTIVITY
2G: GPRS – up to 85.6 kbps; EDGE – up to 236.8 kbps
3G: Up to 7.2 mbps uplink; Up to 5.76 mbps downlink
4G: No
WIFI: Wi-Fi 802.11 b/g/n, WIFI hotspot, WIFI direct, dual-band
Bluetooth: Version 3.0
GPS: A-GPS
USB: MicroUSB v2.0
BATTERY
Capacity: 2630mAh Li-Ion battery
Talktime : Up to 17 hour
Standby Time: Up to 420 hours
Click the button below to download this rom
Post a Comment