Short tutorial on how to flash your tecno A6 phantom 6, Please read this tutorials to prevent any error while flashing your phone.
STEPS
1. Download MTK USB-VCOM driver and install it in your computer. If you dont know how to install this driver then read read full tutorial on how to install MTK USB-VCOM drivers.
2. Download SP-Flash tool and extract it to your computer.
3. Download TECNO A6 Phantom 6 firmware/flashfile and extract it to your computer.
4. Open Sp flash tool folder that you extracted and run "flash_tool.exe" or "flash tool" .(Recommended to run it as administrator"Run as administrator").
5. Click choose "Scatter loading file" and navigate where you extracted your flash file and then select the scatter file usually it looks like "MT6572_Android_scatter".
6. In sp flash tool do not select preloader if you don't what you are doing and then click download.
7. Power off your phone and an then remove the battery.
8. Connect your phone to your computer using USB cable wit out battery.
9. Once your computer has detected your phone then immediately inset your battery. If your phone did't detected your phone then the driver is installed correctly or your USB cable does not work properly so try to fix these issues and try again.
10. Wait until the flashing process is done.
11. Disconnect your phone from computer and power it on. You are all done.
NOTE: Once you power on your phone it will take long time to start up then normal so you have to wait until it start up.
If you have faced with any problem during flashing then comment below.
NOTE: You are flashing your phone at your own risk, I'm not responsible for any damage.
Tecno A6 Phantom 6 SPACIFICATION
| Network | 2G, 3G, 4G. |
| SIM | Dual Micro SIM |
| Display Size | 5.5 Inch |
| Screen Resolution | 1920 x 1080 |
| Memory Card Slot | Yes up to 120 GB |
| Back Camera | Dual Back Camera 13.0 MP, 5.0 MP |
| Front Camera | 8.0 MP |
| Phone Storage | 32 GB |
| Processor | Helio P10 (MT6755) Octa-Core 2.0GHz |
| RAM | 3 GB |
| Operating System | Android 6.0 |
| LED Flash | Yes |
| Battery | 2700 mAh |
Click the button below to download Tecno A6 Phantom 6 (Tecno-A6-H551C1-M-170103V121) ROM(FIRMWARE/FLASH FILE)
Post a Comment